Overview1Add my vote for this tag Reference1Add my vote for this tag create new tag
view all tags
Share this page
Twitter Delicious Digg Facebook Google Bookmarks Reddit StumbleUpon

About Punches

With the assistance of rssslvr, from Calguns

Punches are tools which consist of a fairly wide striking surface at one end, and a narrower surface on the contact end. They can be made of a variety of materials, depending on whether the desire is to move something, destroy something, or mark something.

Types of Punches

This is by no means all-encompassing, but these are the more common punches one will encounter.
  • Chisels - while not exactly a punch, most large punch sets do include a few chisels.
  • Pin punch - flat on one end. This is the most common type of punch in metalworking.
  • Pointed punches - as implied, there's a point on the contact end. These punches are typically used to dent or mark a surface.
  • Roll pin punches - mostly flat, with a small bump in the center to help keep a roll pin from slipping during installation.


In order to prevent damaging or leaving marks on the surface, punches may be designed out of a softer material. Common alternative materials are brass or delrin. Most punches are made out of steel, however.


Depending on what you're trying to do, you may find yourself breaking punches. It is important to note that not all punches are created equal! Avoid all 'cast' punches, when working on metal - they are structurally weaker, and will readily shear off. It's easy to injure yourself when a cast punch snaps, as the fractured end tends to be sharp and can easily be driven into your hand.

Punches to Avoid

  • Cast Punches: Punches which are made from cast steel are far more fragile than forged punches. When looking at punches in a store, check to see if they're cast. If they are, they are unlikely to stand up to anything more than very occasional metal work.
  • Dasco Brand: The ubiquitous blue-handled Dasco punches are cheap for a reason! They are cast, and shear VERY easily. The price (usually around half that of Craftsman) is a false economy, as you will break 3-4 Dasco punches on gun builds in the time it takes to break a single forged Craftsman punch! Normally I avoid disparaging comments about a given brand, but in the case of Dasco, their fragility constitutes a hazard to anyone working on metal with their punches. That having been said, if you're not planning on doing any serious hammering and other work, a Dasco variety pack isn't too bad of a deal. Just don't ever consider them for AK builds...

Brands to Use

  • Craftsman: While by no means indestructible, the red-handled forged Craftsman punches are a very high quality consumer-level punch. They will also tend to bend instead of simply shearing like the cast Dasco punches.
  • Snap-On: Although I haven't used their punches, automotive mechanics frequently claim that Snap-On punches are the most durable out there. Based on the few Snap-On tools I own, I would suspect their allegations are correct.

-- SeanNewton - 05 Apr 2006

Edit | Attach | Watch | Print version | History: r3 < r2 < r1 | Backlinks | Raw View | Raw edit | More topic actions
Topic revision: r3 - 13 May 2012 - SeanNewton
Would this information help out someone you know? Click here to share it! Twitter Delicious Digg Facebook Google Bookmarks LinkedIn Reddit StumbleUpon

This site is powered by the TWiki collaboration platform Powered by PerlCopyright © 2008-2024 by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding TWiki? Send feedback